|PH / CONDUCTIVITY / SALINITY / ORP
pH Meter PCE-CP 11
Multi-parameter pH meter with Bluetooth interface / PC software / Cloud service / Cross-system synchronization of measured values / Up to 7 selectable parameters / For measuring e.g. pH, alkalinity, chlorine, cyanuric acid / Storage of measured values
The multi-parameter pH meter is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter photometer, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter photometer generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample.
Conductivity Meter PCE-SM 11
Conductivity Meter to determine salt content in liquids
With the conductivity meter PCE-SM 11 conductivity in non-saturated solutions can be quickly and accurately determined. The Conductivity Meter PCE-SM 11 has a high measuring accuracy thanks to the automatic temperature compensation. The Conductivity Meter PCE-SM 11 is smaller, faster and more accurate at measuring salt content than a refractometer. The Conductivity Meter can be used for water conditioning, quality control, galvanizing techniques, etc. Measuring values are digitally displayed as a percentage (max. 12% of the weight).
Conductivity Meter PCE-PH 30
pH, conductivity, redox tester with interchangeable sensors / Easy-to-read LC display / Pen pH meter / Automatic temperature compensation
The pH tester PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable pH tester is used to control pH and conductivity. It also serves for simultaneous temperature measurement. Furthermore, the pH tester can be used to measure the redox potential.
Conductivity Meter PCE-CM 41
Conductivity meter for EC and TDS (amount of salts and dissolved solid materials)
With the conductivity meter PCE-CM 41 it is possible to measure conductivity value, the amount of all the solid material or dissolved salts (TDS – Total Dissolved Solids) and the temperature. The conductivity meter PCE-CM 41 is very easy to carry everywhere thanks to its small size. The water resistant enclosure protects properly the electronics (it also protects against dust). The measurement of EC and TDS conductivity has an automatic temperature compensation. The conductivity meter PCE-CM 41 has a wide field of application and can be used in the industry, fish farming, horticulture and others.
Conductivity Meter PCE-PWT 10
pocket size conductivity tester / for ultrapure water /
smallest measuring range 20µS/cm / salinity measurement / temperature compensation up to 60 °C
The conductivity meter is a good solution for anyone who wants to check the conductivity of ultrapure water. This conductivity meter is a compact device with an integrated temperature sensor for optimum temperature compensation. Among other things, the conductivity meter has a very low measuring range of only 0 … 20 μS / cm.
Water Analysis Meter PCE-DRS 2 Salinity / Chlorine Refractometer
Waterproof IP65-rated salinity or salt content (‰) / chlorine content (‰) / specific gravity (SG) / refractive index (nD) refractometer with easy-to-read LCD
PCE-DRS 2 is a handheld digital sodium chloride (NaCl) and chlorine (Cl) refractometer used to determine the salinity or salt content (‰), chlorine content (‰), specific gravity (SG) and refractive index (nD) of liquid. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 … +40 °C / +50 … +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.
Water Analysis Meter PCE-DRS 1 Salinity Refractometer
Waterproof IP65-rated salinity or salt content (%, ‰) / specific gravity (SG) / refractive index (nD) refractometer with easy-to-read LCD
PCE-DRS 1 is a handheld digital sodium chloride (NaCl) refractometer used to determine the salinity or salt content (%, ‰), specific gravity (SG) and refractive index (nD) of liquid. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 … +40 °C / +50 … +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.
Salt Meter PCE-0100 Salinity
Portable pocket salinity refractometer measures salt water, sea water and other salty solutions
PCE-0100 is a Salt Meter used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once.
Water Analysis Meter PCE-BPH 20
Tabletop water analysis meter with bluetooth interface / Data storage / Touchscreen / Measurement data can be exported to USB stick / pH, ORP, conductivity / Analysis software / With automatic and manual temperature compensation
The table-top water analysis meter can be used to quickly and precisely analyze liquid samples. This includes the measurement of pH, temperature, redox, conductivity, TDS, salinity and resistance. Thus, for example, water, alkalis, milk, wine and many other liquids can be checked for their quality with the table pH meter. The temperature probe is used for automatic temperature compensation when measuring a sample with the table pH meter. However, manual input of the temperature for temperature compensation is also possible with the table pH meter.
Water Analysis Meter PCE-228WINE
PCE-228WINE water analysis meter for pH value, redox and temperature / Large, easy-to-read display SD card memory (1 … 16 GB), saved data is saved as an Excel file / RS-232 interface and optional software for direct transmission to the PC
The PCE-228 water analysis meter is a very easy-to-use handheld pH / mV / °C meter. The pH value and the temperature can be saved directly on the SD card (Excel file) or transferred directly from the pH meter to a PC via the RS-232 interface. For this purpose, we optionally offer software and the appropriate RS-232 interface cable as accessories. The temperature compensation takes place either manually or automatically using the temperature sensor supplied.
Dissolved Oxygen Meter PCE-WO2 10
waterproof oxygen meter with HOLD function / testing of oxygen content, oxygen saturation and sample temperature in water/ battery operation / automatic temperature compensation
The oxygen meter is a simple measuring instrument that allows measurement of oxygen content, oxygen saturation and sample temperature. The oxygen meter directly reports measured values in real time via the display. The user is offered a hold function directly on the device. Important measured values can be recorded at the touch of a button directly on the display.
Dissolved Oxygen Meter PCE-PHD 1-O2
SD card memory (1 … 16 GB), stored data is stored as an Excel file / large, easy-to-read display / RS-232 interface and optional software for direct transfer to the PC / Includes an oxygen electrode
Dissolved Oxygen Meter is a portable, easy-to-use measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the Dissolved Oxygen Meter is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.
Dissolved Oxygen Meter PCE-PHD 1
pH value, redox, conductivity, salt, oxygen and temperature measuring device / SD card memory (1 … 16 GB), data is saved as an Excel file / large, easy-to-read display / RS-232 interface and optional software for direct transfer to the PC
The Dissolved Oxygen Meter is a portable, easy-to-use measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the Oxygen Meter is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.
Dissolved Oxygen Meter TETRA-MINI
TETRA-MINI alerts the user acoustically, visually and vibrationally to the presence of flammable gases (CH4), oxygen (O2), hydrogen sulfide (H2S) and carbon monoxide (CO). Furthermore, this unpumped four-gas meter displays the current measured value on its graphic LCD screen with backlight. Other gas sensors are available for this instrument. Call for details.
– Sensor types: CH4 / H2S / CO / O2
Dissolved Oxygen Meter PCE-DOM 20
Oxygen meter with exchangeable probes / Automatic temperature compensation / Oxygen saturation and the sample temperature / For mobile use
The Dissolved Oxygen Meter is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation. As a result, the oxygen meter is also used for analyzing the oxygen content of lakes or streams, as strong temperature fluctuations can occur here, which falsify the measurement result. This oxygen meter is also used, for example, in fish farming.
Water Analysis Meter PCE-CHT 10 Chlorine Tester
Water analysis meter chlorine tester for swimming pools / Measuring range 0 … 10 mg/l Simple operation / Calibration function / Background lighting
The water analysis meter chlorine tester with a measuring range of 0 … 10 mg/l has been developed for rapid chlorine measurement in water. The display of the chlorine analysis meter shows the chlorine content and the temperature. The measurement result appears on the display within a few seconds after the test and can also be frozen. In addition, the water analysis meter shows a symbol in the display when the measured value is stable.
Turbidity Meter PCE-TUM 20
0 … 1000 NTU turbidity measuring range / Infrared LED light source / Calibration references included
PCE-TUM 20 is a portable handheld turbidity meter or turbidimeter for water quality analysis. This turbidity measuring device is equipped with a large LCD screen and user-friendly keyboard. The turbidity meter features two automatically switching measuring ranges between 0 … 50 NTU and 50 … 1000 NTU for increased accuracy. Using the included calibration references of 0 NTU and 100 NTU, the meter can be adjusted at any time. (Note: NTU stands for Nephelometric Turbidity Unit.)
Turbidity Meter PCE-TUM 50
Turbidity meter for drinking and waste water as well as food / Colored graphic display / Measurement of NTU, EBC, ASBC / According to ISO 7027 (90°) / AC Mains operation (220V AC power adapter) / USB interface
The turbidity meter PCE-TUM 50 is a portable device for measuring turbidity according to ISO 7027. This allows the user to quickly and easily determine important water parameters with the turbidity meter and to check the quality of drinking water and waste water. The calibration of the turbidity meter PCE-TUM 50 is very easy due to the calibration standards supplied. The calibration can be carried out with 7 preset points. In addition, user-specific calibration points can also be set. The turbidity meter is capable of measuring turbidity of liquids up to 2000 NTU.
Turbidity Meter PCE-TUM 100
Turbidity Meter, colour display, measuring range up to 500 NTU, scattered light measuring method 90°, mains operation, USB and printer interface
The precision of the turbidity meter ensures accurate measurements in all relevant applications. With five factory-saved calibration points, the turbidity meter offers a ready-to-use solution for different environments. In addition, the turbidity meter offers the option of customised opacity calibration. With up to five calibration points, the turbidity meter can be flexibly adapted to specific requirements and measurement conditions.
Food Hygiene / Hygiene Test Equipment PCE-PH 228M
Hygiene / food testing device with GLP data management / high accuracy ± (0.002 pH + 2 LSD) / data logger / user with password protection / incl. stainless steel food electrode / rechargeable battery operation stainless steel food electrode / battery operation
The advanced and highly accurate hygiene / food tester stands for user-friendliness and GLP (Good Laboratory Practice) compliance. With a high-resolution LCD display, the hygiene / food tester provides a clear and concise display of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation. It is possible to measure pH or redox values and temperature with external sensors.
Food Hygiene / Hygiene Test Equipment PCE-WAT 10
Food Hygiene / Hygiene Test Equipment with measured value memory / Backlit LCD / Accuracy 0.02 aw / Resolution 0.01 aw
The food hygiene / hygiene test equipment is a powerful instrument that has been specially developed for determining the water activity in various materials. With a measuring range of 0.00 to 1.00 aw, this food hygiene / hygiene test equipment offers a wide range of applications, from foodstuffs to pharmaceutical products and chemical substances.
Food / Hygiene Meter PCE-MPC 30
Food / Hygiene Meter with data logger / HCHO measurement / battery for mobile use / 2.8 “TFT display / measurement of mass concentration / data storage on SD card
This food / hygiene meter has many functions. With the food / hygiene meter it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm. In addition to measuring the particles, the food / hygiene meter can also measure the PM 2.5 and PM 10 mass concentration. The mass concentration of the food / hygiene meter determines the weight of the particles on one cubic meter.
Food / Hygiene ATP Testing Meter PCE-ATP 1
Enables rapid detection of bacterial or microbial residue / Stores up to 10,000 date- and time-stamped data records to internal memory / Provides connectivity via USB and Bluetooth printer interfaces / Includes PC software for analysis
PCE-ATP 1 is a food safety / hygiene – ATP tester, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.
Food Hygiene / Hygiene Test Equipment PCE-WAM 10
Food Hygiene / Hygiene Test Equipment with LCD Display / Measurement Range 0.01 … 1 aw / Accuracy ±0.03 aw / Backlit LCD Display / Portable / Includes 3 Sample Trays / Battery Operated
The food hygiene / hygiene test equipment is a portable measuring device for water activity. Water activity indicates the amount of water that is biologically available for microorganisms such as bacteria, fungi, or similar. Each type of microorganism has a minimum water activity value below which no growth is possible. The higher the aw value of a food, the more perishable it is. Bacteria typically require a water activity of over 0.98, but significantly lower water activity of up to 0.6 can be tolerated by extremely halophilic bacteria, for example.
Food / Hygiene Meter PCE-PH20M
Easy-to-use food & hygiene meter for pH determination / External pH electrode / Recalibratable / Waterproof (IP 67)
The food / hygiene meter was developed to directly determine the pH in aqueous media. The waterproof food / hygiene meter PCE-PH20 is used for the fast and accurate measurement of pH. The practical display makes the pH value on the pH meter easy to read. Due to the waterproof and robust housing (IP 67), the food / hygiene meter can also be used under difficult conditions. A recalibration always guarantees optimum accuracy and is very easy to perform using the optionally available calibration kits (automatic calibration function without calibration screws – to be performed only via the keyboard).
Food / Hygiene Meter PCE-DOM 20
Oxygen meter with exchangeable probes / Automatic temperature compensation / Oxygen saturation and the sample temperature / For mobile use
The oxygen meter PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation. As a result, the oxygen meter is also used for analyzing the oxygen content of lakes or streams, as strong temperature fluctuations can occur here, which falsify the measurement result. This oxygen meter is also used, for example, in fish farming.
|COOKING OIL TESTER
Cooking Oil Tester PCE-FOT 10
Cooking oil tester with 3-digit LCD / Backlit / IP65 protected / Status LEDs (blue, green, red) / Display of PC value between 0.5% to 40% / Automatic switch-off function
The cooking oil tester is a measuring device with which you can determine the quality of various types of oil. This cooking oil tester is also successfully used by food inspectors. A measurement is carried out directly in hot fat. For this, the measuring tip is held directly in a fryer or the like. Thus, fast measurement results are guaranteed. The oil temperature in °C / °F and the oil quality in percent PC (polar compounds) are determined within a few seconds. The PC value is a measure of the thermal-oxidative stress level of a frying oil. On the device itself, a traffic light function is installed, so that the oil quality is displayed directly in color.
Photometer PCE-VDL 16I
With up to 800 Hz / Temperature, Humidity, Air pressure, Vibration, and Light
The photometers of the PCE-VDL series are available in two versions. The accelerometer PCE-VDL 16I contains sensors for the following physical units: temperature, humidity, air pressure, light and 3-axis acceleration. The max. sampling rate of the acceleration sensor is 800 Hz, the remaining sensors are sampled with max. 1 Hz.
Fixed-mount light meter with 4-20-mA analog output and control relay / 0 … 50,000 lux measuring range / Includes light sensor wall-mounting bracket
This is a fixed-mount photometer consisting of a transmitter unit and an external light sensor probe with a 1.5 m / 4.9 ft long cable and wall-mounting bracket. This illuminometer allows for the continuous monitoring of light exposure in the workplace. Ideal for use in photography laboratories and production facilities manufacturing light-sensitive food and medical products, the illuminometer can be used to control an alarm (not included) or to save the signals from the transmitter to a data logger (not included) for documentation and review.
Photometer PCE-LMD 200
Photometer class A according to DIN 5032-7 / data logger with 8 GB measured value memory / auto-range switching / external sensor / optional luminance measurement
The photometer is a precise measuring instrument that meets the highest demands for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable detection of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the photometer is extremely versatile.
Photometer PCE-CRM 40
Measurement range up to 150,000 lx / Measures correlated color temperature (CCT) / Standard chromaticity diagrams according to CIE 1931 and CIE 1976 / Indicates wavelength / Presents tristimulus and RGB values / Includes USB interface, cable and PC software
With the photometer or spectrophotometer PCE-CRM 40, important photometric factors in the field of light measurement can be determined. These include the tristimulus values of XYZ, the u´ and v´ color location coordinates according to CIE 1976, and the xy color location coordinates according to CIE 1931. Moreover, further color statistics are measured as absolute values and differences. The user can determine the dominant wavelength within the sensitivity range of the spectrophotometer, which is 360 … 780 nm, as well as the color density (Pe) and the correlated color temperature (CCT) in Kelvin.
Photometer PCE-CP 30
Multi-parameter photometer with Bluetooth interface / PC software / Cloud service / Cross-system synchronization of measured values / Up to 13 selectable parameters / For measuring e.g. pH, alkalinity, chlorine, cyanuric acid / Storage of measured values
The multi-parameter photometer is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter photometer, a water sample of 10 ml must be placed in a cuvette. The LED built into the multi-parameter photometer generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample.
Photometer PCE-170 A
Illuminometer for fast and accurate measurement of light / Measurement range from 0.00 to 40,000 lux / Silicon photodiode sensor / Large 5-digit LCD display / Immediate and accurate response / Selectable manual or automatic range
The PCE-170 A photometer is well-known for its durability as well as its good quality at a good price. The photometer has a wide measurement range. Thanks to its fast response time and compact housing you can use this meter with just one hand. The PCE-170 A Illuminometer can be used even by inexperienced personnel. With the PCE-170 A Illuminometer you will be able to perform a professional valuation. The PCE-170 A Illuminometer can be widely used within the industrial sector. For example, it is possible to check light conditions in workplaces, warehouses, industries and apartments with the PCE-170 A Illuminometer. In addition, emergency escape routes can be tested with the PCE-170A Illuminometer for proper illumination. The PCE-170 A Illuminometer is an irreplaceable instrument to prevent occupational hazards and it meets professional standards.