100FX (LC) multi-mode, 2km

The SPFX offers a short-haul option to extend your network to 2 km.

100FX (LC) single-mode SFP, 15 km

The SPFX offers a short-haul option to extend your network to 15 km The AT-SP series SFPs are compatible with a limited number of SFP compatible products.Call or check with your Allied Telesis sales rep for details.

100FX (LC) single-mode BiDi, 15km

The SPFXBD-LC is available in 1310Tx/1550Rx or 1550Tx/1310Rx models. It offers the latest industry standard in flexible, full-duplex Fast Ethernet connectivity. These hot-swappable fiber interfaces simply plug into a SFP slot on compatible products. You can optimize the configuration to meet your distance and service requirements.

10/100TX (RJ45), SFP, 100m

The Allied Telesis SPTX offers a copper option to extend your network (up to 100 meters).

100/1000/10G-T (RJ-45) SFP+, 20m/100m

100/1000/10G-T (RJ-45), 20m/100m*

* Supports links up to 20m using Cat 6a/7 Cable for 10G and up to 100m for 100/1000T

1000ZX (LC) single-mode SFP, 120km

The SPZX120/I offers a long-haul option to extend your network up to 120km.

1000SX (LC) multi-mode SFP, 550m

The SPSX offers a short-haul option to extend your network to 550 m.

1000SX (LC) multi-mode SFP, I-Temp, 550m

The SPSX/I offers a short-haul option to extend your network to 550 m.

1000SX (LC) multi-mode SFP, Ext-Temp, 550m

The SPSX/E offers a short-haul option to extend your network to 220-550 m.

1000LX (LC) multi-mode SFP, 2km

The SPEX offers a 2 km over multi-mode fiber (1310 nm) option to extend your network. The SPEX is compatible with all the Allied Telesis range of products which have an SFP port.

1000LX (LC) multi-mode SFP, Ext-Temp, 2km

TThe SPEX/E offers a 2 km over multi-mode fiber (1310 nm) option to extend your network. The SPEX is compatible with all the Allied Telesis range of products which have an SFP port.

1000LX (LC) single-mode, 10km

The SPLX10 offers a long-haul option to extend your network up to 10km.

1000LX (LC) single-mode SFP, I-Temp, 10km

1000LX SFP, LC, SMF, 1310 nm, (10 km), I-Temp

100/1000/10G-T (RJ-45) SFP+, 20m/100m

100/1000/10G-T (RJ-45), 20m/100m*

* Supports links up to 20m using Cat 6a/7 Cable for 10G and up to 100m for 100/1000T

1000LX (LC) single-mode SFP, Ext-Temp, 10km

The SPLX10/E offers a long-haul option to extend your network up to 10 km.

1000EX (LC) single-mode, 40km

The SPLX40 offers a long-haul option to extend your network up to 40km.

1000EX (LC) single-mode SFP, Ext-Temp, 40km

The SPLX40/E offers a long-haul option to extend your network up to 40 km

1000ZX (LC) single-mode SFP, 80km

The SPZX80 offers a long-haul option to extend your network up to 80 km.

1000LX (LC) single-mode BiDi SFP, 10 km

The SPBD10 is available in 1310Tx/1490Rx or 1490Rx/1310Tx models. It offers the latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity. These hot-swappable fiber interfaces simply plug into a SFP slot on compatible products. You can optimize the configuration to meet your distance and service requirements.

1000LX (LC) single-mode BiDi SFP, I-Temp, 20km

The SPBD20LC/I is available in 1310Tx/1490Rx or 1490Tx/1310Rx I-Temp models (-40°C to 85°C). It offers the latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity. These hot-swappable fiber interfaces simply plug into a SFP slot on compatible products. You can optimize the configuration to meet your distance and service requirements.

1000LX (SC) Single-Mode BiDi SFP, I-Temp, 20 km

The SPBD20-xx/I is available in 1310Tx/1490Rx or 1490Tx/1310Rx I-Temp models (-40°C to 85°C) with an SC connector. It offers the latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity. These hot-swappable fiber interfaces simply plug into a SFP slot on compatible products. You can optimize the configuration to meet your distance and service requirements.

1000LX (LC) single-mode BiDi SFP, I-Temp, 40km

The SPBD40-xx/I is available in 1310Tx/1490Rx or 1490Tx/1310Rx I-Temp models (-40°C to 85°C). It offers the latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity. These hot-swappable fiber interfaces simply plug into a SFP slot on compatible products. You can optimize the configuration to meet your distance and service requirements.

1000BX (LC) single-mode, 2 channel BiDi CSFP, 1490Tx/1310Rx, 20km

The SPBD20DUAL is a hot-swappable, 2 channel bi-directional transceiver module offering connectivity in a flexible, small form-factor. It is compliant with the latest Gigabit Ethernet standards, as well as the CSFP Multisource Agreement (MSA).

1000BX (LC) single-mode, 2 channel BiDi CSFP, 1490Tx/1310Rx, 40km

The SPBD40DUAL is a hot-swappable, 2 channel bi-directional transceiver module offering connectivity in a flexible, small form-factor. It is compliant with the latest Gigabit Ethernet standards, as well as the CSFP Multisource Agreement (MSA).SPBD40DUAL-14

1000LX (SC), single-mode BiDi SFP, 1310Tx/1490Rx, 20km

The SPBD20-14-EXT offers the latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity. These hot-swappable, fiber interfaces simply plug into a SFP slot on Allied Telesis SFP-compatible intelligent Multiservice Gateways (iMGs).

10/100/1000T (RJ-45) SFP, 100 m

The Allied Telesis SPTX offers a copper option to extend your network (up to 100 meters).

10/100/1000T (RJ-45) SFP, I-Temp, 100m

10/100/1000T (RJ-45) SFP, I-Temp, 100m. The Allied Telesis SPTX/I offers a copper option to extend your network (up to 100 meters) in industrial environments.

10G SR (LC) multi-mode SFP+, 300m

The Allied Telesis SP10SR is a hot pluggable 10Gbps small form factor transceiver module. It is compliant with the SFF-8431 SFP+ Electrical Multi-source Agreement (MSA) with five digital monitoring functions: Temperature, Vcc, Tx optical power, Tx laser bias current and Rx received optical power.

10G SR (LC) multi-mode SFP+, Ext-Temp, 300m

10Gbps SR, SFP+, 300m, Ext-Temp

10G LR (LC) multi-mode SFP+, 220m

The Allied Telesis SP10LRM is a hot-pluggable 10Gbps small form factor transceiver module. It is compliant with the SFF-8431 SFP+ Electrical Multi-source Agreement (MSA) and features five digital monitoring functions: temperature, VCC, transmitted optical power, transmitted laser bias current and received optical power.

10G LR (LC) single-mode, 10km

The SP10LR is a hot pluggable 10Gbps small form factor transceiver module. It is compliant with the SFF-8431 SFP+ Electrical Multi-source Agreement (MSA) with five digital monitoring functions: Temperature, Vcc, Tx optical power, Tx laser bias current and Rx received optical power.

10G LR (LC) single-mode SFP+, Ext-Temp, 10km

10Gbps LR, SFP+, 10km , I-Temp

10G (LC) single-mode, I-Temp, 40km

The Allied Telesis SP10ER40/I is a hot-pluggable 10Gbps small form factor transceiver module.

10G ZR (LC) single-mode SFP+, Ext-Temp, 80km

The Allied Telesis SP10ZR80/I is a hot-pluggable 10Gbps small form factor transceiver module. It is compliant with the SFF-8431 SFP+ Electrical Multi-source Agreement (MSA) and features five digital monitoring functions: temperature, VCC, transmitted optical power, transmitted laser bias current and received optical power.

100/1000/10G-T (RJ-45) SFP+, 20m/100m

100/1000/10G-T (RJ-45), 20m/100m*

* Supports links up to 20m using Cat 6a/7 Cable for 10G and up to 100m for 100/1000T

SFP+ Twinax direct attach cable, 1m

The AT-SP10TW SFP+ direct attach copper cable assembly is a low-cost alternative for short reach applications. The design allows for a serial data transmission up to 12Gbps in each direction. Additionally, the copper cable acts as a natural heat sink. The low power consumption assists in making the
passive copper cable assembly an economic solution for within rack or rackto-rack applications.

The direct attach cable is terminated on both ends with mechanical connectors that plug directly into SFP+ slots in the same manner as SFP+ transceiver modules.

SFP+ Twinax direct attach cable, 3m

The AT-SP10TW SFP+ direct attach copper cable assembly is a low-cost alternative for short reach applications. The design allows for a serial data transmission up to 12Gbps in each direction. Additionally, the copper cable acts as a natural heat sink. The low power consumption assists in making the
passive copper cable assembly an economic solution for within rack or rackto-rack applications.

The direct attach cable is terminated on both ends with mechanical connectors that plug directly into SFP+ slots in the same manner as SFP+ transceiver modules.

SFP+ Twinax direct attach cable, 7m

The AT-SP10TW SFP+ direct attach copper cable assembly is a low-cost alternative for short reach applications. The design allows for a serial data transmission up to 12Gbps in each direction. Additionally, the copper cable acts as a natural heat sink. The low power consumption assists in making the
passive copper cable assembly an economic solution for within rack or rackto-rack applications.

The direct attach cable is terminated on both ends with mechanical connectors that plug directly into SFP+ slots in the same manner as SFP+ transceiver modules.

10G (LC) single-mode SFP, I-Temp, 10 km

The SPBD0/I is available in 1270Tx/1330Rx or 1330Tx/1270Rx I-Temp models (-40°C to 85°C). It offers the latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity. These hot-swappable fiber interfaces simply plug into a SFP slot on compatible products. You can optimize the configuration to meet your distance and service requirements.

10G (LC) single-mode, 20 km, I-Temp

The SP10BD20 is available in 1270Tx/1330Rx or 1330Tx/1270Rx I-Temp models (0°C to 70°C). It offers the latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity. These hot-swappable fiber interfaces simply plug into a SFP slot on compatible products. You can optimize the configuration to meet your distance and service requirements.

10G (LC) single-mode BiDi, 40 km, I-Temp

The SP10BD40/I is available in 1270Tx/1330Rx or 1330Tx/1270Rx I-Temp models (-40°C to 85°C). It offers the latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity. These hot-swappable fiber interfaces simply plug into a SFP slot on compatible products. You can optimize the configuration to meet your distance and service requirements.

100G Passive Small Form-Factor DAC

Allied Telesis QSFP28 small form-factor direct attach cables are suitable for in-rack connections between QSFP28 ports, on all QSFP28 compatible products. They are ideal for short distances, and provide cost-effective connectivity within a rack, or in racks within close proximity of each other.

The QSFP28 DACs are available in 1m and 3m lengths.

100G, QSFP28 LR4, SMF, LC

The Allied Telesis QSFP28 Series offers the latest industry-standard connectivity in a flexible, small form factor. The QSFP28 Series supports 100GbE interconnects. They are ideal for Datacom/Telecom switch and router connections, as well as data aggregation, backplane, proprietary protocol and high-density applications.

100G, QSFP28 SR4, MMF, MPO-12

The Allied Telesis QSFP28 Series offers the latest industry-standard connectivity in a flexible, small form factor. The QSFP28 Series supports 100GbE interconnects. They are ideal for Datacom/Telecom switch and router connections, as well as data aggregation, backplane, proprietary protocol and high-density applications.

40G SR4 (MPO) multi-mode QSFP, 100/150m

The Allied Telesis QSFP Series offers the latest industry-standard connectivity in a flexible, small form factor. These hot-swappable transceiver modules simply plug into any compatible Allied Telesis product.

40G QSFP SR4, MMF, LC, 100/150m

The Allied Telesis QSFP Series offers the latest industry-standard connectivity in a flexible, small form factor. These hot-swappable transceiver modules simply plug into any compatible Allied Telesis product.

40G LR4 (LC) single-mode QSFP, 10km

The Allied Telesis QSFP Series offers the latest industry-standard connectivity in a flexible, small form factor. These hot-swappable transceiver modules simply plug into any compatible Allied Telesis product.

40G, QSFP, ER4 (40 km), CWDM, LC

The Allied Telesis QSFP Series offers the latest industry-standard connectivity in a flexible, small form factor. These hot-swappable transceiver modules simply plug into any compatible Allied Telesis product.

40 Gigabit Passive Small Form-Factor DAC

Allied Telesis QSFP small form-factor direct attach cables are suitable for in-rack connections between QSFP+ ports, on all QSFP+-compatible products. They are ideal for short distances, and provide cost-effective connectivity within a rack, or in racks within close proximity of each other.

The QSFP+ DACs are available in 1m and 3m lengths.

40G QSFP+ port to 4 x 10G ports

Allied Telesis breakout cables allow equipment with one QSFP+ port to connect directly with four 10Gbps SFP+ ports. Ideal for use with Servers, Switches and Adapters, these cables are terminated at one end with a QSFP+ connector, and SFP+ connectors each end of the four breakout cables.

The QSFP-4SFP10G cables are available in 3m and 5m lengths.