PONOVO’s power amplifier is specially designed for RTDS (Real Time Dynamic Simulation) application which requires high power output and high accuracy for all output range. PONOVO also provide customized amplifier system which includes features more than a normal amplifier can provide.
|
Power Amplifier for Real-Time Dynamic Simulation Application
|
 |
PAS Series Switching-mode 4-Quadrant Power Amplifier Grid Emulator
PAS Series Switching-mode 4-Quadrant Power Amplifier (Hereinafter referred to as PAS Series) is the important equipment used for PHIL (Power Hardware in Loop) solution, which can be vastly used for different industry application, such as electrical power system testing, new energy, aerospace.  |
 |
PA460Bi-L Digital Real Time Simulation Power Amplifier
PA460Bi-L power amplifier has six-phase current output. Each phase maximally outputs 15A RMS and maximum output power of 135VA. There is six-phase voltage output. Each phase outputs 120V RMS and maximum output power of 60VA.
|
 |
PA460Bi-H Digital Real Time Simulation Power Amplifier
PA460Bi-H power amplifier has six-phase current output. Each phase maximally outputs 32A RMS and maximum output power of 450VA. There is six-phase voltage output. Each phase outputs 300V RMS and maximum output power of 45VA.
|
 |
PA460Bi-C Digital Real Time Simulation Power Amplifier
PA460Bi-C power amplifier has six-phase current output. Each phase maximally outputs 15A RMS and maximum output power of 135VA.
|
 |
PAD64 DIO-AIO Conversion Set for Conventional Power Amplifier
PAD64 DIO(digital input/output)-AIO(analog input/output) Converter is the equipment which could be used for DI/DO (Digital input/Digital output) conversion and galvanic isolation between Real-time simulation system and protection equipment, and any other equipment which need AIO (analog binary input/ output, dry contacts).
|
 |
PAC2000B Panel-mounted Power Amplifier PAC2000B rtds power amplifier is a kind of high-performance linear power amplifier specially developed for power system simulation, showing incredible performance of not only solving the accuracy problem for linear power amplifier during high power and high current output but keeping the strength of being available for all kinds of capacitive and inductive loads. |
 |
PAC60Ci – Panel Mount
PAC60Ci is the six-phase real time simulation amplifier. This current amplifier is possessed of high accuracy and fast liner response. |
 |
PA60Bi – Panel Mount
PA60Bi is real time simulation amplifier with three-phase current and four-phase voltage.This digital power amplifier is similar with PA30Bi but it has higher current output and power output. |
 |
PA30Bi – Panel Mount
PA30Bi is real time simulation amplifier with three-phase current and four-phase voltage.This digital power amplifier is similar with PA30Bi but it has higher voltage output and power output. |
 |
PA30Bi-H Panel-mounted Amplifier (Power System Simulation) PA30Bi-H is the panel-mounted type power amplifier model which can produce 3-phase current, with maximum RMS phase current of 30A and maximum output power of 450VA, and 4-phase voltage, with maximum RMS phase voltage of 250V and maximum output power of 75VA. |
 |
PAV250Bi Panel-mounted Power Amplifier for Network Simulators PAV250Bi is one of the conventional voltage power amplifier model, which is specially designed for R&D of power system simulation. It is adapted to various capacitive and inductive load. There are 6-phase voltage outputs with 2 options, 250V or 300V maximum output. |
 |
PAV120Bi panel-mounted voltage power amplifier PAV120Bi is specially designed for R&D of power system simulation. It is adapt to various capacitive and inductive load. It is with 6 channels voltage outputs, each channel with 120V/60VA maximum output. It is with high frequency range upto DC 5kHz ±1dB, could be used to consist of complicated HIL and PHIL simulation application together with other amplifier models, equipment.
|
 |
PAC60Cip Portable Power Amplifier
PAC60Cip is the portable conventional linear power amplifier model with six channels of current output. It is with 6*30A/210VA output, and this current amplifier is similar to PAC60Ci but it has lower output power and less weight.
|
 |
PA60Bip Portable Power Amplifier for Power System
PA60Bip power amplifier power system is one of the conventional linear power amplifier models among PONOVO’s PA series portable power amplifier. It has three channels of current output and four channels of voltage output. Each current outputs is with 60A RMS.
|
 |
PA30Bip – Portable Amplifier
PA30Bip is real time simulation amplifier with three-phase current and four-phase voltage. |
 |
PA30Bip-H – Portable
PA30Bip-H portable power amplifier is designed with linear amplifier principle. It is very light portable solution with three channels of current output and four channels of voltage output. |
 |
PAV250Bip – Portable
PAV250Bip is the portable six-phase real time simulation amplifier. This voltage amplifier is similar to PAV250Bi but it has small size and less weight. |
 |
PAV120Bip – Portable
PAV120Bip is the portable six-phase real time simulation amplifier. This voltage amplifier is similar to PAV120Bi but it has small size and less weight. |
 |
PA460Bi Digital Real Time Simulation Power Amplifier PA460Bi amplifier is specially designed for power electricity simulation and solves the high-power problem for linear power amplifier and accuracy problem for heavy current output.
|
 |
PAV800 Four-Quadrant Power Amplifier
PAV800 is the three-phase system including 3-phase power amplifier units and 1 power supply unit. When 3-phase 220V is output, the maximum load current can be up to 4A/phase, 880VA power output, which can meet the user’s power supply for 220V.
|
 |
PAV3000 Four Quadrant Power Amplifier
PAV3000 is one model among PONOVO’s PAV series four-quadrant power amplifier products.
|
 |
PAV5000 PHIL 4-Quadrant Power Amplifier
PAV5000 is the four-quadrant amplifier with high power applied in the semi-physical simulation power platform to analyzer the sensitive load, the equipment power adaptability, and the electric vehicle, etc. and provide the technical support and service on the power quality.
|
 |
PAV10000 4-Quadrant Power Amplifier
PAV Series Four-quadrant Simulation Power Amplifier based on linear power amplifier technology and integrated advanced technical performance and rich functions. |
 |
PAV15000 4-Quadrant Power Amplifier PHIL
PAV15000 is composed of 4 sets of cabinets, the parameters are: 4×43U standard chassis; H×W×D(mm): 2100×650×900; Weight: 3×450kg and 1×280kg. Its output is 270VAC/15000VA (382VDC/15000W), this load time is continuous. Customers can choose the power unit according to their needs.\
|
 |
PAV20000 4-Quadrant Power Amplifier for Simulation Application
PAV20000 is one model of PAV series 4-Quadrant power amplifier. Due to its reliable linear design principle, PAV20000, with very high power output capability, but still can reach very high time-delay and response time accuracy, and extremely low harmonic distortion and fast slew rate, etc.
|
 |
Power Amplifier DIA-01 AURORA Digital Interface for simulator application
PAV DIA01 is the optional accessory unit and Aurora digital interface for PONOVO’s power amplifiers which could convert the analog input signal into digital signal, supporting communication between power amplifier and simulators via AURORA protocol.
|
 |
Power Amplifier DIA-02 AURORA Digital Interface For Simulator Application
PAV DIA02 is the optional unit in the power amplifier solutions for digital communication via AURORA protocol. Via the fiber digital port, it communicates with the real-time dynamic system and then converts the received digital signal into analog signal to output to the power amplifier unit.
|
 |
Power Amplifier DIA-03 AURORA Digital Interface for Simulator Application
PAV DIA03 is the optional unit in the power amplifier solutions for digital communication via AURORA protocol. Via the fiber digital port, it communicates with the real-time dynamic simulator system and then converts the received digital signal into analog signal to output to the power amplifier unit.
|
 |
Monitor Unit for PAV series 4-Quadrant Power amplifier monitor
The 4-Quadrant Power amplifier monitor unit is an optional unit of the PAV series of 4-quadrant amplifiers, which can be assembled into the cabinet.
|
 |
MR1200 Series Portable Multi-channel Waveform Monitoring Recorder
MR1200/1201 S-type, M-type, L-type is mainly used in the power utilities and industrial customers, like factories, to do long-term waveform monitoring, harmonic analysis, etc. MR1200/1201 D is mainly used in power plants, such as the related generator testing, including open circuit, short circuit test, excitation test,etc.
|
 |
PAD24 D10-AIO Conversion Set for Conventional Panel-mounted Type Power Amplifier
PAD24 DIO(digital input/output)-AIO(analog input/output) Conversion Set Conversion Set products. It could be used for DIO (Digital input/output) conversion and galvanic isolation between Real-time simulation system and protection equipment, and another equipment which need AIO (analog binary input/output, dry contacts).
|
 |
PAT01 Conventional panel-mounted type power amplifier control unit
PAT01 is a power amplifier control unit that controls timing output and reference signal test source for power amplifier.
|