• Cable performance testing up to 10GBASE-T plus troubleshooting (distance to fault, wire map, toning)
• Test and troubleshoot EtherNet/IP, PROFINET, EtherCAT cabling with M12X, M12D, and M8D adapters (IE versions)
• Network features include IPv4 and v6 ping, nearest switch diagnostics (IP address, name, port / VLAN number, and advertised data rates)

• Ethernet Alliance-certified PoE Verification detects the PoE class (1-8) and power, and performs a load test of available PoE from the connected switch
• Wi-Fi analysis to Wi-Fi 6E, including networks, channels, and access points (Duo model – 6 GHz support only in countries where allowed)
• Manage results and print reports from LinkWare™ PC

• Quickly determine if a problem is caused by a bad or unconnected cable, insufficient power, or a Powered Device (PD).
• Ethernet Alliance Certified to IEEE-802.3™ PoE standards for reliable multivendor interoperability
• Information for the Network Engineer to investigate potential switch configuration or malfunctions.
• PoE  Switch Verification – Determine if a switch port can provide enough power by reporting PoE class (0-8).

• Powered Pairs – Graphically identifies powered pairs. Including Dual Signature where the switch port delivers power on 2 or 4 pairs (802.3bt or PoE ++)
• Active Switch Detection – Determine if a cable is connected to a switch port and port speed up to 10G
• Cable Testing – Identify any shorted, open or crossed wires at both ends, length of each pair, and send tones to find cables.
• Validate and troubleshoot your Industrial Ethernet copper cabling
• PoE Injector verification – Display injector voltage level

• Attach your tester to any magnetic surface using the strong rare-earth magnet
• Fold the strap to create a simple stand for the meter
• Built in hole to attached the strap to J-Hooks in your data rack

• Compatible with MicroScanner², SimpliFiber Pro, FI-500 FiberInspector Micro, and the MultiFiber Pro

• Clear – Innovative filter technology blocks interference (“buzz”) that makes tracing difficult (“F” models only)
• Precise – SmartTone^™ technology provides five distinct tones for exact pair identification
• Sends loud tone up to 10 miles (16 kilometers) on most cables

• Loud speaker on probe makes the tone easier to hear through drywall, wood, and other enclosures
• Angled bed-of-nails clips allow easy access to individual pairs
• RJ-11 connector is ideal for use on telephone jacks
• Attach nylon pouch (included in kit) to your belt for easy transport

• Ends network cable location confusion, decisively rejects noise and false signals.
• Network cable tracer locates cables on active networks, even when terminated at a switch.
• Isolates cable and wiring within a bundle, despite cable bleed.
• Confirms cable location, verifies cable continuity, and detects cable faults (opens, shorts, and reversed pairs) in one step.

• Signal strength indicator LEDs help you identify one cable that is bundled with other cables.
• Probe has built-in pair tester to identify open, shorted, and crossed pairs.

SmartTone® analog toning technology:

• Isolates individual wire pairs precisely by changing tone when shorted.
• Effectively traces and locates voice, audio, and video cabling.

• Tone generator for tracing installed cables hidden in walls, floors and ceilings
• Remote unit enables one-person testing of installed cables

• Cable Stripper quickly rings and slits many types of cable
• Use the Probe Pic to check for loose or damaged connections
• Cut and strip wire cleaner and faster with the Electricians D-Snips
• Connect to jacks for testing with the standard 4-Wire Modular Adapter
• A soft zippered pouch keeps your telecom installer tools all in one convenient place.

The Pocket Toner comes in three models and several different kit configurations so no matter what your job, you can safely install and test.

• Low-voltage circuit protection for both the unit as well as the detachable cable toner

• Dual audible indicators in the main body and detachable buzzer toner units
• Removable push on connectors
• Auto shut-off
• Easy-to-read indicators

• Compatible with LinkIQ Cable+NetworkTester and LinkIQ Duo Cable+Wi Fi+Network Tester

• Fiber optic network testing features including: IPv4 and v6 ping, nearest switch diagnostics (IP address, name, port / VLAN number)
• Power bank for portable operation
• Includes single carrying case for LinkIQ/ LinkIQ Duo tester, media converters (1G or/and 10G), battery pack, fiber optic patch cords (single-mode and multimode), RJ45 connector cable, SFPs (single-mode and multimode) and accessories