Sales Support

Available time: M-F
8:00 am - 6:00 pm

Latest Video

Order Status

 

Fluke 922 Airflow Meter »

Analyze airflow. Easily. The 922 Micromanometer.

Today’s HVAC technicians want a simple solution for diagnosing ventilation issues. Differential pressure measurements only tell part of the story. Technicians also want to measure air velocity and flow, without having to resort to expensive, difficult to use, specialist tools. The Fluke 922 makes airflow measurements easy by combining three tools: differential pressure, airflow, and velocity into a single, rugged meter.


 

Fluke 971 Temperature Humidity Meter »

Temperature and humidity are two important factors in maintaining optimal comfort levels and good indoor air quality. Quickly and conveniently take accurate humidity and temperature readings with the Fluke 971.The Fluke 971 is invaluable for facility maintenance and utility technicians, HVAC-service contractors, and specialists who assess indoor air quality (IAQ). Lightweight and easy to hold, the Fluke 971 is the perfect tool for monitoring problem areas. With a rugged holster and protected sensor, the Fluke 971 is built to perform and made to last.


 

Fluke 975 AirMeter™ »

One Tool.

Get More Done.

The Fluke 975 AirMeter test tool raises indoor air monitoring to the next level by combining five powerful tools in one, rugged and easy-to-use handheld device. Use the Fluke 975 to optimize HVAC ventilation settings for ASHRAE 62 recommendations, actively monitor conditions that promote a productive environment, and quickly and accurately address occupant comfort complaints the first time. The Fluke 975 measures:

  •     Temperature
  •     Velocity
  •     Humidity
  •     CO2
  •     CO

 

Fluke CO-220 Carbon Monoxide Meter »

Quickly and accurately measure CO levels with easy-to-use compact meter

The Fluke CO-220 Carbon Monoxide Meter makes it easy to take quick and accurate measurements of CO levels with a single compact instrument.

Featuring the newest generation of electrochemical sensors, the CO-220 responds very quickly to ambient changes in carbon monoxide concentration without the use of a pump.

The CO-220 is the perfect instrument for technicians and other professionals who need to measure CO levels within spaces such as industrial environments, commercial buildings, or residential dwellings where accumulation of combustion gas is possible.


 

CO-205 Aspirator Kit »

Sample flue gas with your Fluke CO-210 or CO-220 using the CO-205 Aspirator Kit

Draw flue gas samples up to 700 ºF (370 ºC) reliably for measurement with the Fluke CO-210 Carbon Monoxide probe or Fluke CO-220 Carbon Monoxide meter.

The CO-205 aspirator accessory kit contains all the components necessary to provide a clean sample for the Fluke family of gas measuring devices.


 

Fluke 985 Particle Counter »

Take a new look at indoor air quality.

The new Fluke 985 Particle Counter is the preferred choice for HVAC and IAQ professionals. From filter testing to IAQ investigations, the Fluke 985 is the portable solution for determining airborne particle concentrations. Use the Fluke 985 to immediately respond to occupant complaints, or as part of a comprehensive preventive maintenance program.

With the Fluke 985, you can:

  •     Measure filter efficiency
  •     Monitor industrial cleanrooms
  •     Pre-screen indoor air quality and confidently work with IAQ specialists
  •     Locate particle sources for remediation
  •     Report the effectiveness of repairs to customers
  •     Drive additional business by demonstrating the need for maintenance and repair

With a large screen, intuitive icons for navigation and on-screen data presentation, the Fluke 985 allows users to run more tests quickly, with less time spent cycling through screens to obtain the data. The Fluke 985 is lightweight and easy to use in any position and with easy data export options using USB cable, memory stick it’s easy to review and analyze the data anywhere and anytime.


IR Temperature

 

TiR3FT, TiR4FT Thermal Imagers »

The Fluke TiR3FT and TiR4FT Thermal Imagers are for professionals demanding the best solutions for building diagnostic applications. All Fluke TiR Series models include the innovative IR-Fusion® Technology to assist you to better pinpoint building problems. IR-Fusion captures both a visual (or visible light) image and an infrared image and fuses them together - doesn't just overlay the image. It alligns the two on the imager for a more accurate view at any distance.

Roofing Surveys

Detect wet insulation in flat-roof systems quickly and efficiently. Find damaged portions of the roofing structure and repair or replace before the entire roof is contaminated.

Energy Audits

Perform infrared energy audits for residential and commercial applications. Increase the thermal efficiency of a home or building by scanning for thermal heat loss and cool infiltration or exfiltration , moisture invasion, concrete integrity and heat ventilation problems.

Moisture/Restoration

Accurately detect moisture issues located behind exterior and interior walls, in ceilings or under carpet-covered floors.

Mold Remediation

Control mold by finding unknown sources of moisture that would otherwise go undetected. Infrared scanning is the fastest most efficient way to provide 100% moisture detection coverage


 

Contact Thermometer: Fluke 561 Infrared and Contact Thermometer »

IR Thermometer with K-type thermocouple capability

Lighten up your toolbox. The Fluke 561 IR and contact thermometer, combines the temperature measurement functions that industrial, electrical, and HVAC/R professionals need, all in one tool. It measures both infrared and contact temperature, replacing several other test tools. It’s fast, efficient, and easy to use, saving you valuable time and effort.

With the Fluke 561 infrared thermometer, you can also take contact and ambient temperatures in the way that’s best for you. Use the IR thermometer to measure hot, moving, electrically energized, and hard-to-reach objects instantly. Check motors, insulation, breakers, radiant heating, pipes, corroded connections, and wires. Plus, scan ducts, and other hard-to-reach objects from the floor-leave your ladder in the truck. You can use the Fluke 561’s handy flexible pipe probe, or plug in any industry standard type K mini connector thermocouple probe you already own to take super-heat or internal temperatures.


 

Portable Thermometers: Fluke 60 Series Handheld Infrared Thermometers »

Fluke knows temperature, with more than two decades of thermometry experience. Today, we offer the latest in non-contact IR temperature test tools, probes, accessories, and application expertise for a complete range of applications. And Fluke backs its tools with the industry’s best warranty and highest rated customer service.

 

Reach for a rugged Fluke 60 series IR thermometer for jobs requiring temperature measurement in hard-to-reach, hot, rotating, or dangerous situations Get accurate readings over a broad range of temperatures -40°C to 760°C (-40 °F to 1400 °F). Plus, the enhanced optics allow you to measure smaller objects further away. All with a comfortable and easy to use handheld device.


 

Fluke 572 Handheld Infrared Thermometer »

The Fluke 570 non-contact thermometers are ideal professional diagnostic tools for maintenance professionals requiring the most accurate temperature readings at all distances. The Fluke 570 series infrared (IR) measures surface temperatures, helping to quickly locate lubrication problems, overloads, short-circuits or misaligned and overheated equipment, reducing work and follow-up time, and improving performance.

From close-up electrical connections, to distant room balancing checks, the Fluke 570 series can take IR temperature measurements with ease. Predictive maintenance professionals requiring analysis and documentation use the 574 model with 100-point data logging and included software for graphing and analysis for follow-up reporting and documentation.


 

Fluke 574 Precision Infrared Thermometer »

The Fluke 570 non-contact thermometers are ideal professional diagnostic tools for maintenance professionals requiring the most accurate temperature readings at all distances. The Fluke 570 series infrared (IR) measures surface temperatures, helping to quickly locate lubrication problems, overloads, short-circuits or misaligned and overheated equipment, reducing work and follow-up time, and improving performance.

From close-up electrical connections, to distant room balancing checks, the Fluke 570 series can take IR temperature measurements with ease. Predictive maintenance professionals requiring analysis and documentation use the 574 model with 100-point data logging and included software for graphing and analysis for follow-up reporting and documentation.